Enviar artigo via e-mail 
Novas perspectivas para reabilitação de dentes tratados endodonticamente
Resumo
Vários fatores podem influenciar o desempenho clínico de dentes com tratamento endodôntico (DTE). Além disso diversas são as opções restauradoras indicadas em respeito a este cenário, em especial com o notório avanço de novas técnicas e tecnologias para uso clínico. Dentre estas corriqueiramente envolvem-se o uso de restaurações diretas (confeccionadas com resina composta), pinos metálicos ou de fibra de vidro, pinos pré-fabricados ou fresados, assim como restaurações indiretas compostas de coroas cerâmicas, inlays, onlays ou endocrowns; sempre com o foco na reabilitação funcional e estética do caso em tela. Neste trabalho, através de uma revisão narrativa, foram expostos conceitos relativos às modalidades restauradores que se advêm do uso de novas tecnologias na reabilitação de dentes tratados endodonticamente.
Palavras-chave
Texto completo:
PDF (English)Referências
Menezes-Silva R, Espinoza CAV. Endocrown: a conservative approach. Braz Dent Sci, 2016;19:121-130.
Shibayama R, Araújo CAM, Barros KV. Restaurações indiretas inlay-onlay em resina Nanocerâmica com a tecnologia CAD/CAM: relato de caso. Revista Odontológica de Araçatuba, 2017;38:15-20.
Correia ARM, Sampaio Fernandes JCA, Cardoso JAP, Leal da Silva CFC. CAD-CAM: a informática a serviço da prótese fixa. Revista de Odontologia da UNESP.2016;35:183-189.
Sarkis-Onofre R, Fergusson D, Cenci MS, Moher David, Pereira-Cenci T. Performance of Post-retained Single Crowns: A Systematic Review of Related Risk Factors. J. Endod. 2017;43:175-183.
Bacchi A, Caldas RA, Schmidt D, Detoni M, Matheus Albino Souza, Cecchin D, Farina AP. Fracture Strength and Stress Distribution in Premolars Restored with Cast Post-and-Cores or Glass-Fiber Posts Considering the Influence of Ferule. Biomed Res Int. 2019 Jan 3;2019:2196519.
Liu P, Deng XL, Wang XZ. Use of a CAD/CAM-fabricated glass fiber post and core to restore fractured anterior teeth: A clinical report. J Prosthet Dent. 2010;103(6):330-3.
Ruschel GH, Gomes ÉA, Silva-Sousa YT, Pinelli RGP, Sousa-Neto MD, Pereira GKR, Spazzin AO. Mechanical properties and superficial characterization of a milled CAD-CAM glass fiber post. J Mech Behav Biomed Mater. 2018;82:187-192.
Bacchi A, Dos Santos MB, Pimentel MJ, Caetano CR, Sinhoreti MA, Consani RL. Influence of post-thickness and material on the fracture strength of teeth with reduced coronal structure. J Conserv Dent. 2013;16(2):139-43.
Pegoretti A, Fambri L, Zappini G, Bianchetti M. Finite element analysis of a glass fibre reinforced composite endodontic post. Biomaterials. 2002;23(13):2667-82.
Spazzin AO, Galafassi D, de Meira-Júnior AD, Braz R, Garbin CA. Influence of post and resin cement on stress distribution of maxillary central incisors restored with direct resin composite. Oper Dent. 2009;34(2):223-9.
Garbin CA, Spazzin AO, Meira-Júnior AD, Loretto SC, Lyra AM, Braz R. Biomechanical behaviour of a fractured maxillary incisor restored with direct composite resin only or with different post systems. Int Endod J. 2010;43(12):1098-107.
Caldas RA, Bacchi A, Barão VAR, Versluis A. Should adhesive debonding be simulated for intra-radicular post stress analyses? Dent Mater. 2018;34(9):1331-1341.
Pinto CL, Bhering CLB, de Oliveira GR, Maroli A, Reginato VF, Caldas RA, Bacchi A. The Influence of Post System Design and Material on the Biomechanical Behavior of Teeth with Little Remaining Coronal Structure. J Prosthodont. 2019;28(1):e350-e356.
Maroli A, Hoelcher KAL, Reginato VF, Spazzin AO, Caldas RA, Bacchi A. Biomechanical behavior of teeth without remaining coronal structure restored with different post designs and materials. Mater Sci Eng C Mater Biol Appl. 2017 1;76:839-844.
Bacchi A, Boccardi S, Alessandretti R, Pereira GKR. Substrate masking ability of bilayer and monolithic ceramics used for complete crowns and the effect of association with an opaque resin-based luting agent. J Prosthodont Res. 2019;63(3):321-326.
Bell AM, Lassila LV, Kangasniemi I, Vallittu PK. Bonding of fibre-reinforced composite post to root canal dentin. J Dent. 2005;33(7):533-9.
Awad MA, Marghalani TY. Fabrication of a custom-made ceramic post and core using CAD-CAM technology. J Prosthet Dent. 2007;98(2):161-2.
Balkenhol M, Wöstmann B, Rein C, Ferger P. Survival time of cast post and cores: a 10-year retrospective study. J Dent. 2007;35(1):50-8.
Baccarin AN, Zaze CA. Endocrown – case report. Revista Odontológica de Araçatuba. 2012;33:47-5.
Bankoğlu GM, Turhan BB, Yilmaz H, Aydin C, Karakoca NS. Fracture strength of CAD/CAM fabricated lithium disilicate and resin nano ceramic restorations used for endodontically treated teeth. Dent. Mater. 2017;36(2):135-141.
Dartora G, Rocha Pereira GK, Varella de Carvalho R, Zucuni CP, Valandro LF, Cesar PF, Caldas RA, Bacchi A. Comparison of endocrowns made of lithium disilicate glass-ceramic or polymer-infiltrated ceramic networks and direct composite resin restorations: fatigue performance and stress distribution. J Mech Behav Biomed Mater. 2019 19;100:103401.
Shin Y, Park S, Park JW, Kim KM, Park YB, Roh BD. Evaluation of the marginal and internal discrepancies of CAD-CAM endocrowns with different cavity depths: An in vitro study. J Prosthet Dent. 2017;117:109-115.
Dartora G, Wentz Tretto PH, de Carvalho RV, Bacchi A. Replacement of maxillary incisor crowns over discolored substrates in a single visit with a CAD-CAM system and lithium silicate ceramic.J Prosthet Dent. 2019;121(1):22-25.
Ting-shu S, Jian S. Intraoral Digital Impression Technique: A Review. J Prosthodont. 2015; 24(4):313-21.
Marti AM. Comparison of digital scanning and polyvinyl siloxane impression techniques by DMD students : instructional efficiency and attitudes toward technology. Electronic Theses and Dissertations.Paper 2338. 2015.
Pradíes G, Zarauz C, Valverde A, Ferreiroa A, Martinez-Rus F. Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions based on wavefront sampling technology. J Dent. 2015;43(2):201-8.
Mangano F, Gandolfi A, Luongo G, Logozzo S. Intraoral scanners in dentistry: a review of the current literature. BMC Oral Health. 2017;17(1):149.
Schestatsky R, Zucuni CP, Venturini AB, de Lima Burgo TA, Bacchi A, Valandro LF, Rocha Pereira GK. CAD-CAM milled versus pressed lithium-disilicate monolithic crowns adhesively cemented after distinct surface treatments: Fatigue performance and ceramic surface characteristics. J Mech Behav Biomed Mater. 2019;94:144-154.
Pereira GKR, Graunke P, Maroli A, Zucuni CP, Prochnow C, Valandro LF, Caldas RA, Bacchi A. Lithium disilicate glass-ceramic vs translucent zirconia polycrystals bonded to distinct substrates: Fatigue failure load, number of cycles for failure, survival rates, and stress distribution. J Mech Behav Biomed Mater. 2019;91:122-130.
Cecchin D, Farina AP, Vitti RP, Moraes RR, Bacchi A, Spazzin AO. Acid Etching and Surface Coating of Glass-Fiber Posts: Bond Strength and Interface Analysis. Braz Dent J. 2016;27(2):228-33.
Tsintsadze N, Juloski J, Carrabba M, Tricarico M, Goracci C, Vichi A, Ferrari M, Grandini S. Performance of CAD/CAM fabricated fiber posts in oval-shaped root canals: An in vitro study. Am J Dent. 2017;30(5):248-254.
Bilgin MS, Erdem A, Dilber E, Ersoy İ. Comparison of fracture resistance between cast, CAD/CAM milling, and direct metal laser sintering metal post systems.J Prosthodont Res. 2016;60(1):23-8.
Almaroof A, Alhashimi R, Mannocci F, Deb S. New functional and aesthetic composite materials used as an alternative to traditional post materials for the restoration of endodontically treated teeth. J Dent. 2015;43(11):1308-15.
Streacker AB, Geissberger M. The milled ceramic post and core: A functional and esthetic alternative. J Prosthet Dent. 2007;98(6):486-7.
Zhang X, Pei X, Pei X, Wan Q, Chen J, Wang J. Success and Complication Rates of Root-Filled Teeth Restored with Zirconia Posts: A Critical Review. Int J Prosthodont. 2019;32(5):411-419.
Chesterman J, Jowett A, Gallacher A, Nixon P. Bulk-fill resin-based composite restorative materials: a review. Br Dent J. 2017 10;222(5):337-344.
Isufi A, Plotino G, Grande NM, Ioppolo P, Testarelli L, Bedini R, Al-Sudani D, Gambarini G. Fracture resistance of endodontically treated teeth restored with a bulkfill flowable material and a resin composite. Ann Stomatol (Roma). 2016; 7(1-2): 4-10.
Leprince JG, Palin WM, Vanacker J, Sabbagh J, Devaux J, Leloup G. Physico-mechanical characteristics of commercially available bulk-fill composites. J Dent. 2014;42(8):993-1000.
DOI: https://doi.org/10.18256/2238-510X.2020.v9i2.4485
Apontamentos
- Não há apontamentos.
Journal of Oral Investigations - JOI (ISSN 2238-510X)
Faculdade Meridional – IMED – www.imed.edu.br
Rua Senador Pinheiro, 304 – Bairro Cruzeiro, 99070-220 – Passo Fundo - RS - Brasil
Tel.: +55 54 3045 6100
Indexadores
 |  |  | ||
 |  |  | ||
 |  | |||
| | ||||